Are you a Denver homeowner?
If so, then you’ve probably experienced a leaky toilet at one time or another. This is obviously an annoying problem that can quickly escalate to a big mess.
The key is understanding how to repair the toilet before things get out of control.
Here we take a look at how to fix a toilet leaking at the base until you have a chance to call a Denver plumber. Keep reading to get the inside scoop on DIY repairs for toilet leaks that can help prevent a bathroom emergency.
- Common Signs That a Toilet Is Leaking
- Reasons For a Leak at the Base of a Toilet
- Tools You’ll Need for the Repair
- Basic Steps for Repairing a Leak at the Base
- Call a Denver Plumber
- Tips for How to Fix a Toilet Leaking at the Base
The most common sign that you probably have a leaky toilet is water on the floor. You might also notice wet spots on the ceiling if the bathroom is located upstairs.
When you notice any signs of a toilet leak, it’s crucial to take action right away to keep a small problem from turning into a plumbing disaster. We highly recommend that you turn off the water or disconnect the water supply immediately.
Free Download: Ultimate Plumbing Guide Denver
What causes a toilet to leak from the base? Well, the simple answer is that parts can wear out or come loose over time, especially when you’ve lived in your home for many years.
You won’t need to spend a small fortune on tools or repair supplies, but there are a few basic things you should invest in to fix the problem correctly.
These include a crescent wrench, utility knife, hacksaw, paint scraper, a new wax seal, rubber shims, bath caulk, putty knife, channel lock pliers, latex gloves, toilet bolts, and a Shop-Vac.
The first step is to shut off the water valve on the wall behind the toilet. Now flush out the remaining toilet water.
Unscrew the Tee bolts that hold the bottom of the toilet to the floor. Set the toilet aside and scrape off the old wax ring and the caulking around the base. Slide your new bolts into the flange and put a new wax ring that seals in place.
Lift the toilet and set it back in place while tightening the bolts to the toilet. When you have the bolts nice and snug, go ahead and reconnect the water supply.
The best strategy for fixing a toilet that’s leaking at the base is to let the professionals handle the job. After all, plumbing experts understand exactly what the task requires and have the tools to fix the problem quickly. Whether you need plumbing services or you are replacing a toilet, call our customer service rep today to schedule a service call.
Plus, they will save you from having to get wet and messy.
The key is to hire the best plumbing company in your area.
It’s no secret that every homeowner dreads experiencing a leak when they flush the toilet bowl. Fortunately, these tips for how to fix a toilet leaking at the base will help make your next bathroom emergency a little less traumatic.
Don’t hesitate to get in touch with us today to schedule an appointment with one of our highly trained plumbing professionals.
We are here for all your plumbing needs, whether it’s a new water heater, sump pump, drain cleaning, or frozen water pipes.